The most critical part of a successful Bird Net job is securing the tensioned cables to the structure due to the weight of the net and the strong tension-pressure applied by the turnbuckles.
A variety of attachments are listed below to help you create strong cable-ends and corners to carry the weight of the load on any substrate.
wood
concrete/masonry
Steel
Click on any product photo for enlarged view
Netbolts - Galvanized This high-load bearing expansion bolts is the perfect anchor for most masonry, stone or concrete corner/end attachments. Use the smaller M6 bolt for cable runs under 100 feet. Use 12mm drill bit for M6; 14mm drill bit for M8. 10 per pack.
Mini Netbolt Corner attachment for smaller net jobs (cable runs under 15 feet). Drill an 8mm hole, insert the bolt and turn the eye for a solid hold. Zinc passivated for durability or stainless steel. 10 per pack.
Netbolts - Stainless Steel High-load bearing expansion bolt of highest grade stainless steel for solid lock in concrete, stone or masonry. M6 stainless uses 10mm drill bit for holes. 10 per pack.
Multi-Purpose Cable Bracket This versatile stainless steel bracket is used as an end or intermediate bracket and installed as either a permanent fixutre or as a quick-release cable holder. Can be attached to steel, wood, sheet metal or masonry. 100 per pack.
Multi-Purpose Cable Bracket with Hilti Pin The same versatile stainless steel bracket with a strong Hilti Pin to make attaching to steel or concrete a snap. Just load the pin in the gun and fire. 100 per pack.
Girder Clamp - Stainless Steel For surface up to 2" thick. Bolt on an I-beam, flat steel or any other configuration and attach your wire or turnbuckle directly to it. 10 per pack.
Heavy Duty Steel Clamp This clamp defines the term "heavy duty." Your best bet for larger net installations, this clamp can hold up to 630 lbs of tensioned weight. Bolt to Ib-beam or flat steel and run your cable inside the jaws. 4 per pack.
wood
concrete/masonry
Steel
