| |
Store Home :: Structural Bird Control :: Bird Net :: Bird Net Hardware and Tools :: Corner Attachments
The most critical part of a successful Bird Net job is securing the tensioned cables to the structure due to the weight of the net and the strong tension-pressure applied by the turnbuckles.
A variety of attachments are listed below to help you create strong cable-ends and corners to carry the weight of the load on any substrate.
| Corner Attachments |
 See details
|
Netbolts M6 - Galvanized
This high-load bearing expansion bolts is the perfect anchor for most masonry, stone or concrete corner/end attachments. Use the smaller M6 bolt for cable runs under 100 feet. Use 12mm drill bit for M6; 14mm drill bit for M8. 10 per pack.
Our price: $ 44.00
|
 See details
|
Netbolts M6 - Stainless Steel
High-load bearing expansion bolt of highest grade stainless steel for solid lock in concrete, stone or masonry. M6 stainless uses 10mm drill bit for holes. 10 per pack.
Our price: $ 80.00
|
 See details
|
Netbolts M8 - Galvanized
This high-load bearing expansion bolts is the perfect anchor for most masonry, stone or concrete corner/end attachments. Use the smaller M6 bolt for cable runs under 100 feet. Use 12mm drill bit for M6; 14mm drill bit for M8. 10 per pack.
Our price: $ 60.00
|
 See details
|
Mini Netbolt - Galvanized
Corner attachment for smaller net jobs (cable runs under 15 feet). Drill an 8mm hole, insert the bolt and turn the eye for a solid hold. Zinc passivated for durability or stainless steel. 10 per pack.
Our price: $ 15.00
|
 See details
|
Mini Netbolt - Stainless Steel
Corner attachment for smaller net jobs (cable runs under 15 feet). Drill an 8mm hole, insert the bolt and turn the eye for a solid hold. 10 per pack.
Our price: $ 35.00
|
 See details
|
Multi-Purpose Cable Bracket
This versatile stainless steel bracket is used as an end or intermediate bracket and installed as either a permanent fixutre or as a quick-release cable holder. Can be attached to steel, wood, sheet metal or masonry. 100 per pack.
Our price: $ 37.00
|
 See details
|
Girder Clamp - Stainless Steel
For surface up to 2" thick. Bolt on an I-beam, flat steel or any other configuration and attach your wire or turnbuckle directly to it. 10 per pack.
Our price: $ 110.00
|
 See details
|
Heavy Duty Steel Clamp
This clamp defines the term "heavy duty." Your best bet for larger net installations, this clamp can hold up to 630 lbs of tensioned weight. Bolt to Ib-beam or flat steel and run your cable inside the jaws. 4 per pack.
Our price: $ 85.00
|
|
|
|
|
|
|