| |
Store Home :: Structural Bird Control :: Bird Net :: Bird Net Hardware and Tools :: Intermediate Attachments
Intermediate attachments are important to any Bird Net job. They hold the cable against the wall or structure, ensuring there are no wide gaps wide for birds to squeeze through. Intermediate bird net attachments should be spaced as follows:
2" Netting = every 2-3 feet
1-1/8" Netting = every 1-2 feet
3/4" Netting = every 1-2 feet (preferrably less than 18")
BirdBusters offers a variety of intermediate attachments for any substrate.
| Intermediate Attachments |
 See details
|
Net Spike
A hammer-in attachment that can be used in stone, concrete or sound brick work. Provides a very discreet head to thread the cable. Galvanized metal net spike needs a 4.8mm drill bit for hole; 100 per pack.
Our price: $ 95.00
|
 See details
|
Hilti Loop - Closed
Constructed of high quality, zinc-plated steel, the Hilti Loop is easy to use on stone, concrete or brick. Drill a 8mm hole and hammer it home. Open option for removable nets. 100 per pack.
Our price: $ 110.00
|
 See details
|
Hilti Loop - Open
Constructed of high quality, zinc-plated steel, the Hilti Loop is easy to use on stone, concrete or brick. Drill a 8mm hole and hammer it home. Open option for removable nets. 100 per pack.
Our price: $ 200.00
|
 See details
|
Multi-Purpose Cable Bracket
This versatile stainless steel bracket is used as an end or intermediate bracket and installed as either a permanent fixutre or as a quick-release cable holder. Can be attached to steel, wood, sheet metal or masonry. 100 per pack.
Our price: $ 28.00
|
 See details
|
Roof Tile Clip
Ideal way to hold cable down to tiles. This stainless steel fastener slides under Spanish tile, or screws under composite tiles. 10 per pack.
Our price: $ 17.00
|
 See details
|
Kwik Tog & Eye Loop (for stucco)
Durable plastic fastener affords a solid base for the screw eye in stucco. Drill a 3/8" hole, insert the Kwik Tog so it expands behind the stucco. 50 pairs per pack.
Our price: $ 28.00
|
 See details
|
Net Loop
Low-profile, stainless steel cable run attachment for wood or metal. Secure with self-tapping screw. 100 per pack.
Our price: $ 24.00
|
 See details
|
Thin Wire Net Clip
Great for small net jobs, this stainless steel clip attaches netting to a structure without running a cable attachment system. 100 per pack.
Our price: $ 24.00
|
 See details
|
Anchor Rivets - 1 inch
One of the strongest and most discreet intermediate systems for stone, masonry or brick. Insert plastic anchor into pre-drilled 6.5mm hole and hammer stainless steel split pin home. Two lengths available depending on substrate integrity and use. 100 per pack.
Our price: $ 19.00
|
 See details
|
Split Pin - 1 inch
One of the strongest and most discreet intermediate systems for stone, masonry or brick. Insert plastic anchor into pre-drilled 6.5mm hole and hammer stainless steel split pin home. Two lengths available depending on substrate integrity and use. 100 per pack.
Our price: $ 24.00
|
 See details
|
Anchor Rivets - 1.5 inch
One of the strongest and most discreet intermediate systems for stone, masonry or brick. Insert plastic anchor into pre-drilled 6.5mm hole and hammer stainless steel split pin home. Two lengths available depending on substrate integrity and use. 100 per pack.
Our price: $ 30.00
|
 See details
|
Split Pin - 1.5 inch
One of the strongest and most discreet intermediate systems for stone, masonry or brick. Insert plastic anchor into pre-drilled 6.5mm hole and hammer stainless steel split pin home. Two lengths available depending on substrate integrity and use. 100 per pack.
Our price: $ 26.00
|
 See details
|
Girder Clips - Galvanized - 3/32"-9/64"
Strong, hammer-on clips attaches cable to hard-to-drill steel surfaces. Hammer clip onto edge of I-beam with cable running inside clip (not through hole) for secure connection. Galvanized; 100 per pack.
Our price: $ 65.00
|
 See details
|
Girder Clips - Galvanized - 1/8"-1/4"
Strong, hammer-on clips attaches cable to hard-to-drill steel surfaces. Hammer clip onto edge of I-beam with cable running inside clip (not through hole) for secure connection. Galvanized; 100 per pack.
Our price: $ 70.00
|
 See details
|
Girder Clips - Galvanized - 5/16"-1/2"
Strong, hammer-on clips attaches cable to hard-to-drill steel surfaces. Hammer clip onto edge of I-beam with cable running inside clip (not through hole) for secure connection. Galvanized; 100 per pack.
Our price: $ 75.00
|
 See details
|
Girder Clips - Galvanized - 9/16"-3/4"
Strong, hammer-on clips attaches cable to hard-to-drill steel surfaces. Hammer clip onto edge of I-beam with cable running inside clip (not through hole) for secure connection. Galvanized; 100 per pack.
Our price: $ 115.00
|
|
|
|
|
|